Stream videos and your favorite TV channels without buffering or losing Internet speed. Watch Hulu, Netflix, BBC iPlayer, Skygo, CBS and many more channels / streaming movies. For other benefits, supported channels and devices refer Unblock TV Channels / Streaming Videos.
Important: Before you start
Before you change your DNS settings to use Acevpn DNS servers, be sure to write down the current server addresses or settings on a piece of paper. It is very important that you keep these numbers for backup purposes, in case you need to revert to them at any time.
Setup Unblock TV on Ubuntu using Network Manager
In most modern Linux distributions, DNS settings are configured through Network Manager.
- In the System menu, click Preferences, then click Network Connections.
- Select the connection for which you want to configure Unblock TV. For example:
- To change the settings for an Ethernet connection, select the Wired tab, then select your network interface in the list. It is usually called eth0.
- To change the settings for a wireless connection, select the Wireless tab, then select the appropriate wireless network.
- Click Edit, and in the window that appears, select the IPv4 Settings tab.
- If the selected method is Automatic (DHCP), open the dropdown and select Automatic (DHCP) addresses only instead. If the method is set to something else, do not change it.
- In the DNS servers field, enter Acevpn DNS IP addresses, separated by a space:
- Click Apply to save the change. If you are prompted for a password or confirmation, type the password or provide confirmation.
- Visit Members Area in your browser
- Choose “Unblock TV Authorized IP” tab.
- Choose “Add / Activate New IP Address” and add your current IP address. Save changes.
- Click on “Activate” link to activate your network.
- Restart your device.
- Test that your setup is working correctly; Visit http://check.acevpn.com on your device browser. You should see a message that confirms Unblock TV is enabled.
Setup Unblock TV on Debian
- Edit /etc/resolv.conf:
sudo vi /etc/resolv.conf
- If any nameserver lines appear, write down the IP addresses for future reference.
- Replace the nameserver lines with Acevpn DNS IP addresses:For IPv4:
nameserver 111.111.111.111
nameserver 222.222.222.222 - Save and exit.
- Restart your computer
- Test that your setup is working correctly; Visit http://check.acevpn.com on your device browser. You should see a message that confirms Unblock TV is enabled.
Activating IP Address
![](/acevpn/kb/whmcs/services.png)
![](/acevpn/kb/whmcs/my-services.png)
![](/acevpn/kb/unblock_tv_channels/unblock_tv_ip_activation.png)
![](/acevpn/kb/unblock_tv_channels/unblock_tv_check_status.png)